Network Technologies ASI-IP-GTW User Manual
ASI-IP-GTW User's Manual
Page
90
11 Appendix E: Upgrading Software
SW loading can be performed from the bottom of the /upgrade page, as
shown in Figure 40.
This option is available on SW versions 1.3.0 and above. To load SW on
older SW versions, please refer to documentation on how to load SW by
FTP.
Press the ‘Browse’ button and select the file to load to the device. The
file must have the filename extension ‘.out’. Then press the ‘Upload
Software’ button to start the SW loading.
shown in Figure 40.
This option is available on SW versions 1.3.0 and above. To load SW on
older SW versions, please refer to documentation on how to load SW by
FTP.
Press the ‘Browse’ button and select the file to load to the device. The
file must have the filename extension ‘.out’. Then press the ‘Upload
Software’ button to start the SW loading.
Figure 40 Upgrade SW
File loading from this page uses HTTP port 80, making it useful to pass
through firewalls. If you have not blocked pop-ups in your browser, a
progress meter (Figure 41) is displayed during file transfer. By pressing
the ‘cancel’ button the transmission can be cancelled. If you do not see
the progress meter, the SW loading can still be interrupted by pressing
the stop button in your browser.