National Instruments NI PCIe-8361 User Manual
Chapter 1
Introduction
© National Instruments Corporation
1-3
VXI-MXI-Express Front Panel Features
The VXI-MXI-Express Series controller has the following front panel
features:
features:
•
Eight front panel LEDs
–
FAILED—Indicates the VXI-MXI-Express Series controller
failed power on diagnostics.
failed power on diagnostics.
–
SYSFAIL—Indicates the VMEbus SYSFAIL line has been
asserted on the backplane.
asserted on the backplane.
–
ONLINE —Indicates the board is detected and ready for use.
–
ACCESS—Indicates a VXI bus master is accessing the
VXI-MXI-Express Series controller.
VXI-MXI-Express Series controller.
–
CB—Indicates the circuit breaker has tripped from an over current
condition on the +5.0 V
condition on the +5.0 V
DC
rail of the VXI-MXI-Express Series
controller.
–
ACT—Indicates bus activity on the MXI-Express link.
–
PWRGD—Indicates the on board power supplies are in
regulation.
regulation.
–
LINK—Indicates the MXI-Express link connecting the host
computer to the VXI-MXI-Express Series controller has been
established.
computer to the VXI-MXI-Express Series controller has been
established.
•
Three front panel SMB connectors for:
–
Trigger input
–
Trigger output
–
CLK10 I/O
•
One x1 MXI-Express connector
•
TRIG/CLK PORT A(B)—These ports allow the user to daisy chain
the eight TTL backplane triggers and/or CLK10 between multiple
chassis.
the eight TTL backplane triggers and/or CLK10 between multiple
chassis.
•
CABLE STATUS LED
Off
Indicates no cables are connected to the TRIG/CLK
PORT A(B) ports.
PORT A(B) ports.
Blinking Red
Indicates the cables are connected incorrectly to the
TRIG/CLK PORT A(B) ports.
TRIG/CLK PORT A(B) ports.
Solid Green
Indicates the cables are connected correctly to the
TRIG/CLK PORT A(B) ports.
TRIG/CLK PORT A(B) ports.