National Instruments NI PCIe-8361 User Manual
Appendix B
Default Settings
© National Instruments Corporation
B-3
Default Software Settings
The following hardware configurations are available through
Measurement & Automation Explorer (MAX).
Measurement & Automation Explorer (MAX).
Table B-1. VXI-MXI-Express Series Controller Hardware Default Settings
Jumper
Description
Setting
W2
SMB CLK10 DIR
1–2 In (Default)
2–3 Out
2–3 Out
W3
External CLK10 Source Select
1–2 SMB (Default)
2–3 Trigger Card
2–3 Trigger Card
W4
CLK10 Source Select
1–2 Internal Osc. (Default)
2–3 Exteranl Source
2–3 Exteranl Source
W5
MITE Configuration
1–2 Factory
2–3 User (Default)
2–3 User (Default)
W7
Trigger Card CLK10 Direction
1–2 Out
2–3 IN
2–3 IN
W8
MITE Self Configuration
1–2 Disable
2–3 Enable (Default)
2–3 Enable (Default)
J2
Slot 0 Detect
1–2 Non-Slot 0
3–4 Auto Detect (Default)
5–6 Slot 0
3–4 Auto Detect (Default)
5–6 Slot 0
Table B-2. MAX Device Tab Default Settings
Editor Field
Default Setting
Device class
Message-based
Number of handlers
1
Table B-3. MAX Shared Memory Tab Default Settings
Editor Field
Default Setting
Don’t share memory
A24/A32 write posting
Enabled