National Instruments NI PCIe-8361 User Manual
Glossary
© National Instruments Corporation
Glossary-7
N
NI-488.2 or
NI-488.2M
NI-488.2M
The National Instruments industry-standard software for controlling
GPIB instruments.
GPIB instruments.
NI-DAQ
The National Instruments industry-standard software for data acquisition
instruments.
instruments.
NI-VISA
The National Instruments implementation of the VISA standard; an
interface-independent software that provides a unified programming
interface for VXI, GPIB, and serial instruments.
interface-independent software that provides a unified programming
interface for VXI, GPIB, and serial instruments.
NI-VXI
The National Instruments bus interface software for VME/VXIbus
systems.
systems.
Non-Slot 0 device
A device configured for installation in any slot in a VXIbus mainframe
other than Slot 0. Installing such a device into Slot 0 can damage the device,
the VXIbus backplane, or both.
other than Slot 0. Installing such a device into Slot 0 can damage the device,
the VXIbus backplane, or both.
P
PCI
Peripheral Component Interconnect. The PCI bus is a high-performance
32-bit or 64-bit bus with multiplexed address and data lines.
32-bit or 64-bit bus with multiplexed address and data lines.
PCI Express
A serialized, highly scalable I/O interconnect standard that leverages
existing PCI technology such as the software model and the load-store
architecture.
existing PCI technology such as the software model and the load-store
architecture.
R
register-based device
A Servant-only device that supports VXIbus configuration registers.
Register-based devices are typically controlled by message-based devices
via device-dependent register reads and writes.
Register-based devices are typically controlled by message-based devices
via device-dependent register reads and writes.
Resman
The name of the National Instruments Resource Manager in NI-VXI bus
interface software. See also Resource Manager.
interface software. See also Resource Manager.
Resource Manager
A message-based Commander located at Logical Address 0, which
provides configuration management services such as address map
configuration, Commander and Servant mappings, and self-test and
diagnostic management.
provides configuration management services such as address map
configuration, Commander and Servant mappings, and self-test and
diagnostic management.