NEC LT265 User Manual

쐊 Menu Descriptions & Functions [Reset]

The Reset feature allows you to change adjustments and settings to the factory preset for sources by the following
methods:

Resets the adjustments for the current signal to the factory preset levels.
All the items in “Adjust (except “Wall Color”) can be reset.

Reset all the adjustments and settings for all the signals to the factory preset except Entry List, Language, Back-
ground, Cabinet Button Lock, Password (Menu), Password (Logo), Security, LAN Mode, Projector Name,
Commnication, Remaining Lamp Time, Lamp Hour Meter and Projector Usage.

Reset all the adjustments and settings for all the signals to the factory preset except Language, Background,
Cabinet Button Lock, Password (Menu), Password (Logo), Security, LAN Mode, Projector Name, Commnication,
Remaining Lamp Time, Lamp Hour Meter and Projector Usage.
Also deletes all the signals in the Entry List and returns to the factory preset.

NOTE: Locked signals in Entry List cannot be reset.

Resets the lamp clock back to zero.

NOTE: The projector will turn off and go into standby mode after 2100 hours (up to 4100 hours in Eco mode) of service. In this
condition you cannot clear the lamp hour meter on the menu. If this happens, press the "HELP" button on the remote control for
ten seconds to reset the lamp clock back to zero. Do this only after replacing the lamp.