Network Technologies ST-NXM-U-HD User Manual

22

Dimensions

19"W x 10" D x 1.75" H

Operating temperature

0°C - 55°C  (32°F - 131°F)

Power requirements

120 or 240VAC @ 50 or 60Hz

Video bandwidth

200 MHz (without cables)

Video sync

TTL

Chassis material

Aluminum

VMTINT-3/6/10/15/25

Interface PS/2 Keyboard and Mouse and VGA video to Nodemux-HD switch

SMTINT-3/6/10/15/25

Interface SUN Keyboard and Mouse and VGA video to Nodemux-HD switch

VMTINT-3/6/10/15/25-MM

Interface PS/2 CPU to Nodemux-HD switch

SMTINT-3/6/10/15/25-MM

Interface SUN CPU to Nodemux-HD switch

   MM- male connectors on both ends

If the cable desired is not listed above, please visit our website at 

http://www.nti1.com

 for a complete listing of the cables and

adapters we offer,   or call us at (800) 742-8324 (800-RGB-TECH)  or  (330) 562-7070.

If this NTI switch was designed to be directly mounted to a rack, it includes a mounting flange to make attachment easy.
Install 4 captive nuts to the rack in locations that line up with the holes (or slots) in the mounting flange on the NTI switch.
Then secure the NTI switch to the rack using four 3/16" diameter screws (not provided).    Each screw should be of sufficient
length to go completely through the NTI mounting flange, rack frame and fully engage all threads in the captive nut.    We suggest
installing additional rails to the rack frame to support the weight of the switch.    Be sure to tighten all mounting screws securely.

Do not block power supply vents in the NTI switch chassis (if provided) .

Attach all cables securely to the switch and where necessary supply adequate means of strain relief for cables.

NTI