Nortel Networks NN44200-300 User Manual
Installation overview
25
Step
Description
Check
Note: If you are connecting the optional Nortel server subnet, do not power up
unless your antivirus programs and Nortel security updates are installed first.
unless your antivirus programs and Nortel security updates are installed first.
•
Connect the 1002rp server to the CLAN hub or switch (optional) (see
ATTENTION
To comply with EMC radiation requirements, a Class A hub must be
located 10 m (33 ft.) away from the 1002rp server. Shielded Ethernet
cables must be used.
located 10 m (33 ft.) away from the 1002rp server. Shielded Ethernet
cables must be used.
•
Install the software feature dongle (see
).
•
Connect the power cords for all devices, and then power them up.
11
Start the 1002rp server (see
Conventions for warnings
You may encounter the following types of warnings in this guide. Do not
ignore them.
ignore them.
DANGER
Warns you of an immediate electrical hazard which, if not avoided,
can result in shock, serious injury, or death.
can result in shock, serious injury, or death.
WARNING
Warns you of a situation in which you can be injured if instructions
are not followed exactly as stated.
are not followed exactly as stated.
Nortel CallPilot
1002rp Server Hardware Installation
NN44200-300
01.01
Standard
5.0
23 February 2007
Copyright © 2007, Nortel Networks
Nortel Networks Confidential
.