Nortel Networks NN44200-300 User Manual
57
Appendix A
EMC emission level protection for the
1002rp Server
EMC emission level protection for the
1002rp Server
To lower the EMC emission level, ferrite cores are installed with one loop
(see diagram below) on the following external cables:
(see diagram below) on the following external cables:
•
Ferrite Core (TDK and part number ZCAT3035-1330) — for the triple
DS30X I/O cable (Nortel and part number NTRH2014), at each end
of the cable
DS30X I/O cable (Nortel and part number NTRH2014), at each end
of the cable
•
Ferrite Core (TDK and part number ZCAT1325-0530) — for the modem
power supply cable, at each end of the cable
power supply cable, at each end of the cable
•
Ferrite Core (Fair Rite and part number 0431164181) — for the Trenton
combined keyboard and mouse Y connector cable, at the server end
of the cable
combined keyboard and mouse Y connector cable, at the server end
of the cable
•
Ferrite Core (part number WE 742 7111) — for Ethernet port cat5 UTP
cable, at the server end of the cable
cable, at the server end of the cable
CAUTION
The ferrite cores are preinstalled on these customer provided
cables. It is not the customer’s responsibility to attach these ferrite
cores to these cables. However, the customer should ensure that
these ferrites are in place to keep the EMC emission levels low.
cables. It is not the customer’s responsibility to attach these ferrite
cores to these cables. However, the customer should ensure that
these ferrites are in place to keep the EMC emission levels low.
Nortel CallPilot
1002rp Server Hardware Installation
NN44200-300
01.01
Standard
5.0
23 February 2007
Copyright © 2007, Nortel Networks
Nortel Networks Confidential
.