Nokia 12 GSM MODULE REMOTE I/O User Manual

 

The following chapter describes the commands and status messages available 
in the Remote I/O control. Status messages are sent in response to device 
status queries. You can define an alias for each of the commands and status 
messages described here with Configurator.  

The first part of the chapter lists commands that are sent to the Remote I/O 
control as part of a control message; the second part provides a list of status 
messages for which an alias can be defined.  

The Nokia 12 GSM Module supports the SMS commands listed in Table 4. 
These commands are for controlling or monitoring purposes (to query the state 
of a device attached to the Nokia 12 GSM Module). An alias can be defined for 
each of the commands.  

 

Note: If an alias is defined, the default command will be disabled. There can be 
only one effective command or alias for each function at a time. An alias must not 
be equal to a default command. 

Empty aliases cannot be used. If an empty alias is set, the default command will 
remain effective. 

 

Note: The alias string must be unique and the maximum length is 24 characters. 
Neither commands nor aliases are case sensitive. However, the message identifier 
and password are. 

 

OUTPUT_GET x 

Return a state of output x, x = pin number 1-9 

OUTPUT_SET x ON 

Set output x ON, x = pin number 1-9 

OUTPUT_SET x OFF 

Set output x OFF, x = pin number 1-9 

OUTPUT_INVERT x 

Inverts output x, x = pin number 1-9 

OUTPUT_PULSE x ON *

Output x pulse ON  *, x = pin number 1-9 

OUTPUT_PULSE x OFF 
* 

Output x pulse OFF *, x = pin number 1-9 

OUTPUT_GET ALL 

Return a state of all outputs 

OUTPUT_SET ALL ON 

Set all outputs ON 

 

 

27/49