Nortel Networks 2750 User Manual
Chapter 4 Installing option cards and DIMMs 63
Nortel VPN Router Installation — VPN Router 2750
Removing the front bezel and top cover
To install option cards or DIMMs, you must remove the front bezel and the top
cover from the gateway.
cover from the gateway.
To remove the front bezel:
1
Shut down the VPN Router 2750 using the Web GUI or the CLI, and then
unplug it as described in
unplug it as described in
2
Use a Phillips screwdriver to turn each of the two screws on the front bezel a
quarter turn counterclockwise
quarter turn counterclockwise
Figure 20
Removing the front bezel
Warning:
Risk of electric shock
Turn off the VPN Router 2750, and unplug it before you attempt to
install an option card or DIMM.
install an option card or DIMM.
CS260015E