Nortel Networks 2750 User Manual
92
Appendix A Technical specifications
NN46110-318 02.01
provides the pinouts for the ADSL Annex B cable.
ISDN BRI interface card
The ISDN BRI S/T and ISDN BRI U interface cards have a single RJ-45
connector that provides the signals needed to interface to ISDN equipment. (To
connect the ISDN S/T interface to the ISDN network, you must attach an external
NT-1 device to the RJ-45 connector.)
connector that provides the signals needed to interface to ISDN equipment. (To
connect the ISDN S/T interface to the ISDN network, you must attach an external
NT-1 device to the RJ-45 connector.)
shows the ISDN BRI S/T interface card or the ISDN BRI U interface
card. The two look identical.
Figure 38
ISDN BRI S/T or IDSDN BRI U
The connector on the ISDN BRI S/T and ISDN BRI U interface cards
accommodates an 8-pin RJ-45 modular patch cord. These cables are sold as
Category 5, or Ethernet, cables.
accommodates an 8-pin RJ-45 modular patch cord. These cables are sold as
Category 5, or Ethernet, cables.
Table 27
ADSL Annex B cable pinouts
RJ-11 termination
RJ-45 termination
Signal
Pin # to Pin #
Signal
N/C
1
6
N/C
Tip
2
5
Tip
Ring
3
4
Ring
N/C
4
3
N/C
Note: Nortel does not supply a cable with the ISDN BRI interface cards.