Nortel Networks 1002rp User Manual
Preparing for installation
Standard 1.07
34
CallPilot
Installation overview
Introduction
This section provides an overview of the steps required to install the 1002rp
server and peripheral devices.
server and peripheral devices.
Installation checklist
The following checklist identifies the tasks that must be performed when
installing the CallPilot server. For detailed instructions, see Chapter 5,
“Installing the server.” When you are finished with the installation, continue
with the Installation and Configuration Task List (555-7101-210).
installing the CallPilot server. For detailed instructions, see Chapter 5,
“Installing the server.” When you are finished with the installation, continue
with the Installation and Configuration Task List (555-7101-210).
Step
Description
Check
1
Ensure that you have reviewed the “Installing the CallPilot
server” section in the Installation and Configuration Task List
(555-7101-210), and completed stage 1 of the “Installation
checklist.”
server” section in the Installation and Configuration Task List
(555-7101-210), and completed stage 1 of the “Installation
checklist.”
❒
2
Unpack the server, and ensure you have all the items you need
(see page 37).
Complete the following checklists that are provided in the
Installation and Configuration Task List (555-7101-210):
(see page 37).
Complete the following checklists that are provided in the
Installation and Configuration Task List (555-7101-210):
“CallPilot software media and documentation checklist”
“CallPilot server hardware checklist”
❒
3
❒
4
Replace the server cover.
❒
5
Install the power supply modules in the server (see page 47).
❒