Nortel Networks 1002rp User Manual
October 2006
Preparing for installation
1002rp Server Hardware Installation
37
Unpacking the 1002rp server
Introduction
Follow this procedure to unpack the server and peripherals.
To unpack the equipment
1 Carefully open the cardboard carton containing the server.
2 Remove the server from the carton; set it on the floor.
3 Carefully open the cartons containing the monitor, keyboard, mouse,
modem, and ELAN hub (if supplied), and set the peripherals aside.
4 Put all manuals, CD-ROMs, operating system disks, and any disks for
peripherals in a safe place.
.
WARNING
Risk of personal injury
The 1002rp CallPilot server weighs approximately 34 kg
(75 lb) as shipped from manufacturing. To prevent personal
injury, have someone help you to unpack and position the
server.
(75 lb) as shipped from manufacturing. To prevent personal
injury, have someone help you to unpack and position the
server.
ATTENTION
As you unpack each item, check it off against the
packing list, as well as against the following
checklists provided in the Installation and
Configuration Task List (555-7101-210):
packing list, as well as against the following
checklists provided in the Installation and
Configuration Task List (555-7101-210):
“CallPilot software media and documentation
checklist”
checklist”
“CallPilot server hardware checklist”