Nortel Networks R2MFC User Manual
73
R2MFC Media Bay Module Installation and Configuration Guide
Chapter 7
Command Line Interface (CLI)
Command Line Interface (CLI)
Overview
This chapter describes the Command Line Interface (CLI) available through the serial port.
Command Line Interface (CLI) commands are organized as a tree of directories. Each directory
contains a set of commands related to a specific purpose or subject. The available directories for
R2MFC MBM are:
contains a set of commands related to a specific purpose or subject. The available directories for
R2MFC MBM are:
•
Note: Most directories and commands have a short form indicated by uppercase letters.
To access a directory, type the directory name or the short form. A list (or menu) of available
commands or subdirectories displays. The commands are not case-sensitive.The list displays again
if you type an incorrect command or an empty command.
commands or subdirectories displays. The commands are not case-sensitive.The list displays again
if you type an incorrect command or an empty command.
To go to the previous menu level in the tree, type an asterisk (*).
Users and passwords
The CLI contains the following two hard-coded user names with passwords:
•
RS232 — This is the default user, which does not require a password. This user accesses
configuration and maintenance commands.
configuration and maintenance commands.
•
admin — Password: admin. This user has access to the same set of commands as RS232.
Note: Users and passwords are case-sensitive.