Nortel Networks 201i User Manual
November 2006
Installing the 201i server in the Succession 1000 system
201i Server Hardware Installation
111
Note: Alternate connection scenarios are supported, but are not depicted in
this guide. If you want to use a connection scenario that is not described in
this guide, ensure that you use appropriate cabling for each device.
this guide. If you want to use a connection scenario that is not described in
this guide, ensure that you use appropriate cabling for each device.
Before you begin
1. Before you install the SCSI devices in a daisy chain, you must configure
the SCSI device IDs and DIP switches. For instructions, see “Preparing
peripheral devices,” on page 121.
peripheral devices,” on page 121.
To install the NTRH3502 cable
1 Remove the inner SCSI bracket from the inside of the Media Gateway or
Media Gateway Expansion.
See the diagram on page 112.
.
CAUTION
Risk of equipment damage
You must power off the 201i server before connecting or
disconnecting SCSI cables.
disconnecting SCSI cables.