Nortel Networks 201i User Manual
November 2006
About the 201i server
201i Server Hardware Installation
27
In the illustration on page 26, the telephony LAN (TLAN) provides IP
connectivity between the Succession 1000 system and the i2004 Internet
phonesets. The connection between the Call Server and Media Gateway can
be point-to-point, or it can be through the LAN, if the system is installed in a
distributed data network.
connectivity between the Succession 1000 system and the i2004 Internet
phonesets. The connection between the Call Server and Media Gateway can
be point-to-point, or it can be through the LAN, if the system is installed in a
distributed data network.
For information about the Succession 1000 system and i2004 Internet
phoneset bandwidth and network requirements, refer to the Succession 1000
Planning and Installation Guide (NTP 553-3023-210).
phoneset bandwidth and network requirements, refer to the Succession 1000
Planning and Installation Guide (NTP 553-3023-210).
For a description of each Succession 1000 system component, see
“Succession 1000 description” on page 96.
“Succession 1000 description” on page 96.
CallPilot CLAN and ELAN network
setup
The 201i server supports the following network protocols:
CLAN: 10/100Base-T Ethernet
A built-in Ethernet controller on the 201i server motherboard provides
Ethernet CLAN capability. The CLAN provides data connectivity
between desktop and web messaging clients, administrative PCs, and the
CallPilot server.
Ethernet CLAN capability. The CLAN provides data connectivity
between desktop and web messaging clients, administrative PCs, and the
CallPilot server.
ELAN: 10Base-T Ethernet
A built-in Ethernet controller on the 201i server motherboard provides
Ethernet ELAN capability. The ELAN carries call processing traffic
between the CallPilot server and the Meridian 1 switch or
Succession 1000 system.
Ethernet ELAN capability. The ELAN carries call processing traffic
between the CallPilot server and the Meridian 1 switch or
Succession 1000 system.
Note: For more information about the ELAN, see “About the ELAN” in
the CallPilot Installation and Configuration Task List.
the CallPilot Installation and Configuration Task List.
You use the 201i server multi I/O cable to establish the CLAN and ELAN
connections. For more information, see page 28.
connections. For more information, see page 28.