Nortel Networks 201i User Manual
November 2006
Preparing for installation
201i Server Hardware Installation
41
Unpacking and inspecting the 201i server
Introduction
This section describes how to:
unpack the 201i server and peripherals
inspect the 201i server for damage
It also describes what to do if you determine that the 201i server is faulty.
To unpack the 201i server
1 Remove the 201i server from the carton and its antistatic bag.
2 Place the 201i server on an antistatic surface.
3 Carefully open the cartons containing the monitor, keyboard, mouse,
modem, and ELAN hub (if supplied), and set the peripherals aside.
4 Put all manuals and CD-ROMs in a safe place.
5 Save all packing materials and cartons in case you must return any
equipment to the carrier.
6 Review “201i server description” on page 16, and perform a visual
inspection as described in “To inspect the 201i server for shipping
damage” on page 42.
damage” on page 42.
ATTENTION
As you unpack each item, check it off against the
packing list, as well as the following checklists provided
in the CallPilot Installation and Configuration Task List:
packing list, as well as the following checklists provided
in the CallPilot Installation and Configuration Task List:
“CallPilot software media and documentation checklist”
“CallPilot server hardware checklist”