Nortel Networks 201i User Manual
November 2006
Installing the 201i server in a large Meridian 1 system
201i Server Hardware Installation
53
See the following diagram:
5 Replace the pin connector so the pins protrude through both connectors.
Ensure that the connectors are correctly aligned as shown in the diagram
below.
below.
.
CAUTION
Risk of equipment damage
If the connectors are not correctly aligned when the pin
connector is pressed into the socket, the pins can bend.
connector is pressed into the socket, the pins can bend.
G101545
Screw location
for Meridian 1
for Meridian 1