Nortel Networks 201i User Manual
Installing the 201i server in a large Meridian 1 system
Standard 1.07
62
CallPilot
Installing the NTRH3501 backplane cable
Introduction
You must connect the backplane (tip and ring) cable supplied with the 201i
server (NTRH3501) for 100Base-T Ethernet CLAN operation. This cable
offers more network throughput than the cable you just removed from the
Meridian 1.
server (NTRH3501) for 100Base-T Ethernet CLAN operation. This cable
offers more network throughput than the cable you just removed from the
Meridian 1.
When installed, this cable completes the connection between the left slot,
the I/O panel on the rear of the switch, and the multi I/O cable on the 201i
server.
the I/O panel on the rear of the switch, and the multi I/O cable on the 201i
server.
Backplane (tip and ring) cable
The following diagram shows the NTRH3501 backplane (tip and ring)
cable:
cable:
G101546
Backplane (tip and ring) cable NTRH3501
UP 1
UP 2
UP 3