Nortel Networks 201i User Manual

Installing the 201i server in a large Meridian 1 system

Standard 1.07

68

CallPilot

1 Thread the SCSI connector end of the NTRH1408 cable from the front of 

the Meridian 1 along the bottom of the shelf to either the left or the right 
access channel.

2 Leave the low-profile right-angle SCSI connector hanging for now. You 

will connect it later to the 201i server faceplate.

Note: The following diagram shows what the connection looks like after 
the cable is connected:

3 Thread the cable through the access channel to the back of the 

Meridian 1.

4 Attach the NTRH1408 cable to the inside of the I/O panel slot associated 

with the 201i server right slot.

5 Connect the NTRH1410 cable to the NTRH1408 cable connector on the 

I/O panel.

G101556

Access channels 
to rear of cabinet

201i server

Intermediate
SCSI cable
NTRH1408