Nortel Networks 201i User Manual
Installing the 201i server in the Succession 1000 system
Standard 1.07
96
CallPilot
Succession 1000 description
Introduction
The Succession 1000 system is an IP PBX that provides telephony and data
capabilities over an IP network. The Succession 1000 system consists of the
following major components:
capabilities over an IP network. The Succession 1000 system consists of the
following major components:
Call Server
Media Gateway
Media Gateway Expansion
Call Server
The Call Server provides telephony services and call processing.
It supports up to four Media Gateways and four Media Gateway Expansions
when the Small System Controller (SSC) card inside the unit is fully
populated with two dual-port 100BaseT daughterboards.
when the Small System Controller (SSC) card inside the unit is fully
populated with two dual-port 100BaseT daughterboards.
The following connectors are located on the back of the Call Server:
four 100Base-T connectors for connecting Media Gateways using one of
the following:
the following:
for connections over the LAN customer-supplied standard 100Base-T
CAT5 Ethernet cables
CAT5 Ethernet cables
for point-to-point connections (Nortel-supplied crossover Ethernet
cables)
cables)
one 10Base-T Ethernet connector that
provides the ELAN interface to management software applications,
such as Optivity Telephony Manager and CallPilot
such as Optivity Telephony Manager and CallPilot
accepts an industry-standard Medium Access Unit (MAU)
one SDI connector that interfaces with three TTY ports using a three-port
SDI cable
SDI cable