Nortel Networks Option 11C User Manual
Page 224 of 544
System Controller cards
Table 70
Default SDI port settings on the NTDK97 MSC card
Default SDI port settings on the NTDK97 MSC card
Refer to “SDI ports” on page 227 of this guide for more information on the
SDI ports.
SDI ports.
Conferencing
Sixteen conference channels are provided by the NTDK97 MSC card’s
conference device.
conference device.
The conference device provides 16 ports of conferencing capabilities (one
conference participant per port). A conference call can have three to six
participants. To illustrate, you can have a maximum of five 3-party
conferences per device, or two 6-party conferences plus one 3-party
conference.
conference participant per port). A conference call can have three to six
participants. To illustrate, you can have a maximum of five 3-party
conferences per device, or two 6-party conferences plus one 3-party
conference.
Ethernet Interface
The NTDK97 MSC card is equipped with a 10 Mbps Ethernet port. A 15 pin
connector located in the back of the main chassis provides an external
connection to the ethernet port. This is for a standard 15-pin AUI interface for
a MAU.
connector located in the back of the main chassis provides an external
connection to the ethernet port. This is for a standard 15-pin AUI interface for
a MAU.
Network Switching and signalling
Option 11C Mini has 10 DS-30x loops. The main chassis accommodates the
first 6 (loops 4, 5, and 6 occupy slot 4). The chassis expander accommodates
the last 4.
first 6 (loops 4, 5, and 6 occupy slot 4). The chassis expander accommodates
the last 4.
TTY Port
Baud rate
Data
bits
Stop
bits
Parity
Use
0
Set by a DIP switch
8
1
None
MTC/SCH/BUG
1
1200
8
1
None
MTC/SCH/BUG
2
1200
8
1
None
MTC/SCH/BUG