Nortel Networks Option 11C User Manual
Page 243 of 544
260
Chapter 9 — The TDS/DTR card
Contents
This section contains information on the following topics:
Introduction
The TDS/DTR card function was incorporated into the NTDK20 SSC used
with Option 11C. However, it is still supported on the system.
with Option 11C. However, it is still supported on the system.
The TDS/DTR functionality is also incorporated into the NTDK97 MSC card
used with Option 11C Mini. The TDS/DTR is not required in a 2 chassis
Option 11C Mini configuration.
used with Option 11C Mini. The TDS/DTR is not required in a 2 chassis
Option 11C Mini configuration.
The TDS/DTR card can occupy any of slot numbers 1 - 9 in the main cabinet.
it must be manually programmed in LD 13 (for DTR) and LD 17 (for TDS
and TTY).
it must be manually programmed in LD 13 (for DTR) and LD 17 (for TDS
and TTY).
The TDS/DTR card can not be placed in the expansion cabinet or slot 10 of
the main cabinet.
the main cabinet.