Nortel Networks 703t User Manual

703t server description

Standard 1.04

30

CallPilot

This section identifies external devices that are supported by the 703t 
server. The following table describes the supported peripheral devices:

Modem 

A 56 Kbps external modem (NTRH9078 in North America 
only) provides remote access to the 703t server. The modem 
connects to the RS-232 COM1 connector on the rear of the 
server. 

Because the modem is an external device, it requires its own 
AC power source referenced to the same ground as the 703t 
server and the switch to which it is connected.

Ethernet hub 

A 10Base-T Ethernet hub provides the ELAN connection 
between the 703t server and the Meridian 1 switch or 
Succession 1000 system. The customer can supply a hub or 
switch from third-party vendors or from Nortel.

Because the hub is an external device, it requires an AC 
power source referenced to the same ground as the 703t 
server and the switch to which it is connected.

To comply with EMC requirements, a Class A hub must be 
located 10 m (33 ft.) away from the 703t server.

Monitor, keyboard, 
and mouse

„

15-inch monitor: NTRH9011 or N0038380 LCD monitor

Because the monitor is an external device, it requires its 
own AC power source referenced to the same ground as 
the 703t server and the switch to which it is connected.

„

Keyboard: NTRH9013

„

Mouse: NTRH9014