Nortel Networks M3820 User Manual
Digital Telephone IP Adapter Installation and Administration Guide
131
January 2005
Changing configuration settings using Configuration Manager
RLC Connection configuration field descriptions
Field
Description
Unit ID
The RLC’s non-configurable unit ID of 254.
RLC Port Number
Enter the RLC voice port number designated for the
Digital Telephone IP Adapter unit on the RLC Remote
connection configuration property sheet.
The default is 0.
Digital Telephone IP Adapter unit on the RLC Remote
connection configuration property sheet.
The default is 0.
IP Connection
!
Click on the Enable option button, if you want to route
calls over your IP network.
calls over your IP network.
!
Click on the Disable option button, if you do not want
to route calls over your IP network.
to route calls over your IP network.
The default is Disable.
IP Connection: IP Address
Enter the RLC’s IP address. The Digital Telephone IP
Adapter unit uses this IP address to connect to the RLC
over the IP network.
Adapter unit uses this IP address to connect to the RLC
over the IP network.
IP Connection: IP
Signaling
Signaling
!
Click on the Permanent option button to configure this
port’s IP connection to be up at all times.
port’s IP connection to be up at all times.
!
Click on the On Demand option button to configure
this port’s IP connection to be up only when needed.
this port’s IP connection to be up only when needed.
The default is Permanent.
Refer to “Deployment” on page 64 for help in determining
which setting to configure.
Refer to “Deployment” on page 64 for help in determining
which setting to configure.
PSTN Connection
This setting does not apply to Digital Telephone IP
Adapters.
Adapters.
PSTN Connection: PSTN
Number to Connect to
RLC
Number to Connect to
RLC
This setting does not apply to Digital Telephone IP
Adapters.
Adapters.