Nortel Networks 620 User Manual

Configuration via the Command Line Interface

E-DOC-CTC-20051017-0169 v0.1

4.8.3 Clear Command Group

What is it used for

This command group comprises two commands, intended for clearing Security 
Associations:

clear all

clear session

The clear command group is accessed in the following way:

clear all

This command clears all active Phase 1 and Phase 2 Security Associations for all 
defined peers. The command has no associated parameters. The successful 
execution of the command is notified to the user. 

clear session

This command clears the IKE Security Association and all active Phase 2 Security 
Associations for one particular peer.

The peer is indicated by its name. The result of the command is notified to the user. 
In the following example no Security Association was active for the peer, named 
peer1, at the time of execution of the command:

=>
=>ipsec
[ipsec]=>clear
[ipsec clear]=>

[ipsec clear]=>all
ok.
[ipsec clear]=>

After clearing, the individual Security Associations can be established 
again, either by starting connections, or triggered by traffic complying with 
the policy.

[ipsec clear]=>session
name = peer1
:IPSec clear session name=peer1
Failed to find session for peer peer1
[ipsec clear]=>