Nortel Networks 620 User Manual

Configuration via Local Pages

E-DOC-CTC-20051017-0169 v0.1

3 Configuration via Local Pages

Prerequisites

In order to use the VPN features in the SpeedTouch™608(WL)/620, you should 
enable the VPN software module. 

To activate this VPN module, you have to acquire the optional software activation 
key. To check whether the software activation key is present, browse to the 
SpeedTouch™ Web pages and go to Expert Mode > SpeedTouch > Add-On. This 
page shows which keys are enabled. For more information , see the SpeedTouch™ 
Operator’s Guide.

IPSec Web Pages

All IPSec configurations can be built by means of the SpeedTouch™ local Web 
pages.

Application-oriented configuration pages gives you direct access to all relevant 
parameters. Getting your IPSec configuration up and running is as easy as selecting 
your application and filling out a few Web pages. The application-oriented pages 
cover the most common application scenarios.

Additional Web pages are component-oriented and allow to control advanced 
settings, such as certificates management and debugging options. The Advanced 
Web pages allow you to build an operational IPSec configuration by combining 
configuration components in a similar way as the underlying CLI commands.

VPN Menu

All IPSec related configuration pages are accessed via Expert Mode > VPN.

Access to user-friendly configuration 
pages for these specific application 
scenarios.

Access to the Certificate configuration 
pages.

Access to the Advanced configuration 
pages, reflecting the commands and 
command groups of the CLI.

Debugging pages, allowing you to 
diagnose VPN connection problems.