Nortel Networks M3310 User Manual
204
Digital Telephone IP Adapter Installation and Administration Guide
Administration
Standard 2.1
Restarting the system
After a firmware upgrade or a configuration change, it is often necessary to
restart the Digital Telephone IP Adapter unit. Use the following procedure to
restart the unit using Configuration Manager.
restart the Digital Telephone IP Adapter unit. Use the following procedure to
restart the unit using Configuration Manager.
Note: After you restart the system, wait 7–10 seconds before placing a call.
Getting there
911x
→
Configuration Manager
When to perform a restart
Each time that you make a configuration change, perform a Save to Flash. You
must also restart the unit if Configuration Manager prompts you to do so.
must also restart the unit if Configuration Manager prompts you to do so.
Note: When you save configuration changes to Flash, the system suspends new
call processing for approximately 30 seconds. Some configuration changes do
not take effect until the unit has been re-started.
call processing for approximately 30 seconds. Some configuration changes do
not take effect until the unit has been re-started.
Restarting the unit
To restart the unit:
To restart the unit:
1
From the Menu Bar, choose Connect
→
System Reset
→
Restart.
Result: The System Restart dialog box displays, similar to the following:
2
Click the Yes button.
Result: The Restarting the System. Please Wait.....progress bar displays
indicating that Configuration Manager is restarting the system, similar to the
following:
indicating that Configuration Manager is restarting the system, similar to the
following: