Cisco 7603 and Catalyst WS-C6503 chassis 1400W AC power supply PWR-1400-AC= User Manual
Product codes
PWR-1400-AC=
17
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
OL-10362-04
Supported Hardware
10-Gigabit Ethernet Switching Modules
Product ID
(append “=” for spares)
(append “=” for spares)
Power
Required
Required
Product Description
Minimum
Software Version
Software Version
WS-X6704-10GE
6.28 A@42 V 4-port 10-Gigabit Ethernet
•
CEF720 with
(adds 0.75 A@42 V)
•
dCEF720 with
(adds 3.30 A@42 V)
•
dCEF720 with
(adds 3.00 A@42 V)
•
Supports egress multicast replication
•
QoS port architecture (Rx/Tx):
–
With DFC3: 8q8t/1p7q8t
–
With CFC: 1q8t/1p7q8t
•
Number of ports: 4
Number of port groups: 4
Port ranges per port group: 1 port in each group
Number of port groups: 4
Port ranges per port group: 1 port in each group
Supported only with Supervisor Engine 720
12.2(33)SRA
Note
•
WS-X6704-10GE requires one of the following:
–
(3.30 A@42 V)
–
(3.00 A@42 V)
–
(0.75 A@42 V)
•
WS-X6704-10GE ships with
•
WS-X6704-10GE is supported in the
chassis.
•
WS-X6704-10GE is not supported in the
WS-C6503
and
CISCO7603
chassis.
•
In a
, WS-X6704-10GE is supported only in slots 9 through 13 and does not power up in other slots.
•
On WS-X6704-10GE ports, Spanning Tree Protocol (STP) bridge protocol data units (BPDUs) are not exempt from
suppression. Do not configure Traffic Storm Control on STP-protected WS-X6704-10GE ports that
interconnect network devices.