Samsung S3C2410A User Manual
S3C2410A
SPI INTERFACE
22-1
22
SPI INTERFACE
OVERVIEW
The S3C2410A Serial Peripheral Interface (SPI) can interface the serial data transfer. The S3C2410A includes two
SPI, each of which has two 8-bit shift registers for transmission and receiving, respectively. During an SPI transfer,
data is simultaneously transmitted (shifted out serially) and received (shifted in serially). 8-bit serial data at a
frequency is determined by its corresponding control register settings. If you only want to transmit, received data can
be dummy. Otherwise, if you only want to receive, you should transmit dummy '1' data.
SPI, each of which has two 8-bit shift registers for transmission and receiving, respectively. During an SPI transfer,
data is simultaneously transmitted (shifted out serially) and received (shifted in serially). 8-bit serial data at a
frequency is determined by its corresponding control register settings. If you only want to transmit, received data can
be dummy. Otherwise, if you only want to receive, you should transmit dummy '1' data.
There are 4 I/O pin signals associated with SPI transfers: the SCK (SPICLK0,1), the MISO (SPIMISO0,1) data line,
the MOSI (SPIMOSI0,1) data line, and the active low /SS (nSS0,1) pin (input).
the MOSI (SPIMOSI0,1) data line, and the active low /SS (nSS0,1) pin (input).
FEATURES
— SPI Protocol (ver. 2.11) compatible
— 8-bit Shift Register for transmit
— 8-bit Shift Register for receive
— 8-bit Prescaler logic
— Polling, Interrupt, and DMA transfer mode