Nortel Networks 4050 User Manual
Chapter 3 Managing the network access devices 115
Nortel Secure Network Access Switch 4050 User Guide
Controlling communication with the network access
devices using the SREM
devices using the SREM
To stop communication between the Nortel SNAS 4050 and a network access
device, disable the switch. Click Apply and Commit to apply the change
immediately.
device, disable the switch. Click Apply and Commit to apply the change
immediately.
To restart communication between the Nortel SNAS 4050 and a network access
device, enable the switch. Click Apply and Commit to apply the change
immediately.
device, enable the switch. Click Apply and Commit to apply the change
immediately.
When you first add a network access device to the Nortel SNAS 4050 domain, the
switch is disabled by default. Do not enable the switch until you have completed
configuring it. In particular, do not enable the switch until you have mapped the
VLANs (see
switch is disabled by default. Do not enable the switch until you have completed
configuring it. In particular, do not enable the switch until you have mapped the
VLANs (see
) and exchanged
the necessary SSH keys (see
Note: If the switch is not going to be used in the Nortel SNA network,
Nortel recommends deleting the switch from the Nortel SNAS 4050
domain, rather than just disabling it.
Nortel recommends deleting the switch from the Nortel SNAS 4050
domain, rather than just disabling it.