Nortel Networks 4050 User Manual
118 Chapter 4 Configuring the domain
320818-A
A Nortel SNAS 4050 domain encompasses all the switches, authentication
servers, and remediation servers associated with that Nortel SNAS 4050 cluster.
servers, and remediation servers associated with that Nortel SNAS 4050 cluster.
If you ran the quick setup wizard during initial setup, Domain 1 has been created.
If you did not run the quick setup wizard, you must create at least one domain. For
information about creating a domain, see
If you did not run the quick setup wizard, you must create at least one domain. For
information about creating a domain, see
To delete a domain, see
or
.
Configuring the domain using the CLI
To configure the domain, access the Domain menu by using the following
command:
command:
/cfg/domain
From the Domain menu, you can configure and manage the following:
•
domain parameters such as name and portal IP address (pVIP) (see
)
•
Authentication, Authorization, and Accounting (AAA) features
•
•
for authorization, see
and
•
for accounting, see
•
the SSL server used for the domain portal (see
•
SSL trace commands
•
SSL settings
Note: With Nortel Secure Network Access Switch
Software Release 1.0, you cannot configure the Nortel SNA solution to
have more than one domain.
Software Release 1.0, you cannot configure the Nortel SNA solution to
have more than one domain.