Nortel Networks 4050 User Manual
130 Chapter 4 Configuring the domain
320818-A
Configuring domain parameters using the CLI
To configure the domain, use the following command:
/cfg/domain <domain ID>
where
domain ID
is an integer in the range 1 to 256 that uniquely identifies the
domain in the Nortel SNAS 4050 cluster.
The Domain menu displays.
The Domain menu includes the following options:
/cfg/domain <domain ID>
followed by:
name <name>
Names or renames the domain.
•
name
is a string that must be unique in the domain.
The maximum length of the string is 255
characters.
characters.
The name is a mnemonic aid only and is not used by
other functions.
other functions.
pvips <IPaddr>
Sets the pVIP for the domain. The pVIP is the portal
address to which clients connect in order to access the
Nortel SNA network. For more information, see
address to which clients connect in order to access the
Nortel SNA network. For more information, see
A domain can have more than one pVIP. To configure
multiple IP addresses for the portal, use a comma to
separate the IP address entries.
multiple IP addresses for the portal, use a comma to
separate the IP address entries.
aaa
Accesses the AAA menu, in order to configure
authentication, authorization, and accounting features.
authentication, authorization, and accounting features.
•
For authentication, see
•
For authorization, see
•
For accounting, see
.
server
Accesses the Server menu, in order to configure the
portal SSL server (see
portal SSL server (see
).