Nortel Networks 4050 User Manual

Chapter 4 Configuring the domain 133

Nortel Secure Network Access Switch 4050 User Guide

 

heartbeat <interval>

Sets the time interval between checks for client activity.

•

 is an integer that indicates the time 

interval in seconds (

s

), minutes (

m

), or hours (

h

). 

The valid range is 60s (1m) to 86400s (24h). The 
default is 1m (1 minute).

hbretrycnt <count>

Specifies the number of times the Nortel SNAS 4050 
will repeat the check for client activity when no 
heartbeat is detected.

•

 is an integer in the range 1–65535 that 

indicates the number of retries. The default is 3.

If no heartbeat is detected after the specified number of 
retries (the inactivity interval), the Nortel SNAS 4050 
default behavior is to terminate the session (see 

).

status-quo on|off

Specifies whether the Nortel SNAS 4050 domain 
operates in status-quo mode. Status-quo mode 
determines the behavior of the Nortel SNAS 4050 if no 
client activity is detected after the inactivity interval 
(

heartbeat

 x 

hbretrycnt

). The options are:

•

on

 — the client session continues indefinitely

•

off

 — the Nortel SNAS 4050 terminates the 

session immediately

The default is 

off

.

action 
teardown|restricted

Specifies the action to be performed if the client fails 
the TunnelGuard SRS rule check. The options are:

•

restricted

 — the session remains intact, but 

access is restricted in accordance with the rights 
specified in the access rules for the group

•

teardown

 — the SSL session is torn down

list

Lists the SRS rules configured for the domain. 

For information about creating SRS rules, see 

The TunnelGuard applet can apply different SRS rules 
for different groups. For information about specifying 
the SRS rule to use for the TunnelGuard check, see 

followed by: