Nortel Networks 4050 User Manual
Chapter 4 Configuring the domain 163
Nortel Secure Network Access Switch 4050 User Guide
If there are no problems, then a dialog appears to indicate that the wizard is
processing the information. The wizard creates the domain, and assigns the
following default VLAN IDs:
processing the information. The wizard creates the domain, and assigns the
following default VLAN IDs:
•
Green VLAN = VLAN ID 110
•
Yellow VLAN = VLAN ID 120
You can change the VLAN mappings when you add or modify the network
access devices (see
access devices (see
15 Click Close to exit the wizard.
16 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Deleting a domain using the SREM
To delete a domain, perform the following steps:
1
Select the Secure Access Domain > Secure Access Domain Table tab.
The Export Content screen appears (see
2
Select the domain from the Secure Access Domain Table list.
3
Click Delete.
A dialog box appears to confirm this domain is to be deleted.
4
Click Yes.
The domain is removed from the Secure Access Domain Table.
5
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.