Nortel Networks 4050 User Manual
Chapter 5 Configuring groups and profiles 223
Nortel Secure Network Access Switch 4050 User Guide
2
Enter the Extended Profile information in the applicable fields.
describes the Extended Profile Configuration fields.
3
Click Apply to create the new extended profile.
The new extended appears appears in the list on the Extended Profiles tab.
Mapping linksets to a group or profile using the SREM
You can tailor the portal page for different users by mapping preconfigured
linksets to groups and extended profiles. Linksets configured for a group display
on the portal page after the linksets configured for the user’s extended profile.
linksets to groups and extended profiles. Linksets configured for a group display
on the portal page after the linksets configured for the user’s extended profile.
For information about configuring linksets, see
.
Topics in this section include:
•
•
Table 36
Extended Profile Configuration fields
Field
Description
Index
An integer in the range 1 to 63 that uniquely identifies the
profile in the group.
profile in the group.
The default value for this field is the lowest unused index
number available. This value cannot be changed after the
extended profile is created.
number available. This value cannot be changed after the
extended profile is created.
Filter Name
The name of the predefined client filter that determines
whether the Nortel SNAS 4050 will apply this extended
profile to the user.
whether the Nortel SNAS 4050 will apply this extended
profile to the user.
VLAN Name
The name of the VLAN to which the Nortel SNAS 4050 will
assign users with this profile.
assign users with this profile.