Nortel Networks 4050 User Manual
Chapter 10 Configuring system settings 473
Nortel Secure Network Access Switch 4050 User Guide
The Host Port menu includes the following options:
Managing interface ports using the CLI
To view and manage the ports assigned to an interface, use the following
command:
command:
/cfg/sys/host #/interface <interface ID>/ports
where
interface ID
is an integer in the range 1 to 252 that uniquely identifies
the interface on the Nortel SNAS 4050 host.
The Interface Ports menu displays.
/cfg/sys/host #/port <port>
followed by:
autoneg on|off
Specifies the Ethernet auto-negotiation setting for the
host and NIC port. The options are:
host and NIC port. The options are:
•
on
— the port is set to auto-negotiate speed and
mode. This is the recommended setting.
•
off
— speed and mode are fixed at a specified
setting.
The default is
on
.
When auto-negotiation is on, ensure that the device to
which the port is connected is also set to
auto-negotiate.
which the port is connected is also set to
auto-negotiate.
speed <speed>
Sets the speed for the host and NIC port when
auto-negotiation is set to
auto-negotiation is set to
off
.
•
speed
— the port speed in megabits per second.
The options are
10|100|1000
.
mode full|half
Sets the duplex mode for the host and NIC port when
auto-negotiation is set to
auto-negotiation is set to
off
. The options are
full
and
half
.
The default duplex mode is
full
.