Nortel Networks 4050 User Manual
514 Chapter 10 Configuring system settings
320818-A
Removing a host interface
To delete a host interface, perform the following steps:
1
Select the System > Hosts > host > Interfaces tab.
The Interfaces screen appears (see
2
Select an interface from the list.
3
Click Delete.
A confirmation dialog appears.
4
Click Yes.
The interface is removed from the Interfaces list.
5
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Configuring static routes using the SREM
Static routes can be applied to a cluster, a host, or a particular interface. To view or
configure static routes at a particular level, choose from the following sections:
configure static routes at a particular level, choose from the following sections:
•
•
•
All static route are configured the same way, as described in