Nortel Networks 4050 User Manual
Chapter 10 Configuring system settings 525
Nortel Secure Network Access Switch 4050 User Guide
The port is removed from the Port Table.
5
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Configuring the access list using the SREM
The access list is a cluster-wide list of IP addresses for hosts authorized to access
the Nortel SNAS 4050 devices by Telnet, SSH, and SREM. You can configure the
list to allow access by individual machines or a range of machines on a specific
network.
the Nortel SNAS 4050 devices by Telnet, SSH, and SREM. You can configure the
list to allow access by individual machines or a range of machines on a specific
network.
If the access list is empty, then access is open to any machine.
For information about enabling Telnet and SSH access, see
or
.
To configure the access list, select the System > Access List tab.