Nortel Networks 4050 User Manual

554 Chapter 10 Configuring system settings

320818-A

 

Enter the remote host information in the applicable fields. 

 describes 

the Add SSH Key fields.

Click Paste to enter the contents of a downloaded SSH key file in the box 
provided.

Valid formats are:

•

RSA1 keys — the OpenSSH implementation (native format or with the 
line wrapped)

•

RSA and DSA keys — the SECSH Public Key File Format, as described 
in Internet Draft 

draft-ietf-secsh-publickeyfile

Click Add.

Click Apply on the toolbar to send the current changes to the Nortel 
SNAS 4050. Click Commit on the toolbar to save the changes permanently.

You can configure the Nortel SNAS 4050 cluster to include a RADIUS server to 
receive log messages about commands executed in the CLI or the SREM, for audit 
purposes.

An event is generated whenever a system user logs on, logs off, or issues a 
command from a SREM session. The event contains information about user name 
and session ID, as well as the name of executed commands. You can configure the 
system to send the event to a RADIUS server for audit trail logging, in accordance 
with RFC 2866 (RADIUS Accounting).

If auditing is enabled but no RADIUS server is configured, events will still be 
generated to the event log and any configured syslog servers.

 Add SSH Key fields

Host name or IP Address

Specifies the host whose SSH key you are adding. You can 
provide a comma-separated list of names and 
IP addresses for the host.