Nortel Networks 4050 User Manual

Chapter 2 Initial setup 61

Nortel Secure Network Access Switch 4050 User Guide

 

The profiles determine the VLAN to which the user will be allocated. 

shows the extended profiles that have been created.

One or several domain names have been added to the DNS search list, 
depending on what you specified at the prompt in the quick setup wizard. This 
means that the client can enter a short name in the portal’s various address 
fields (for example, 

inside instead of inside.example.com if 

example.com was added to the search list). 

If you selected the option to enable http to https redirection, an additional 
server of the http type was created to redirect requests made with http to https, 
since the Nortel SNAS 4050 portal requires an SSL connection.

After you have installed the first Nortel SNAS 4050 in a cluster (see 

another Nortel SNAS 4050 to the cluster by configuring the second Nortel 
SNAS 4050 setup to use the same MIP. When you set up the Nortel SNAS 4050 to 
join an existing cluster, the second Nortel SNAS 4050 gets most of its 
configuration from the existing Nortel SNAS 4050 device in the cluster. The 
amount of configuration you need to do at setup is minimal.

You can later modify settings for the cluster, the device, and the interfaces using 
the 

/cfg/sys/[host <host ID>/interface]

 commands.

Extended profile details

1

tg_failed

yellow

tg_failed

2

tg_passed

green

tg_passed