Nortel Networks 4050 User Manual
622 Chapter 12 Configuring SNMP
320818-A
The SNMPv2-MIB menu includes the following options:
Configuring the SNMP community using the CLI
To configure the community aspects of SNMP monitoring, use the following
command:
command:
/cfg/sys/adm/snmp/community
The SNMP Community menu displays.
The SNMP Community menu includes the following options:
/cfg/sys/adm/snmp/snmpv2-mib
followed by:
sysContact <contact>
Designates a contact person for the managed Nortel
SNAS 4050 cluster.
SNAS 4050 cluster.
•
contact
is a string specifying the designated
contact person’s name, together with information
about how to contact this person.
about how to contact this person.
snmpEnable
disabled|enabled
disabled|enabled
Enables or disables generating authentication failure
traps. The default is disabled.
traps. The default is disabled.
/cfg/sys/adm/snmp/community
followed by:
read <name>
Specifies the monitor community name that grants read
access to the MIB. If you do not specify a monitor
community name, read access is not granted.
access to the MIB. If you do not specify a monitor
community name, read access is not granted.
The default monitor community name is
public
.
write <name>
Specifies the control community name that grants read
and write access to the MIB. If you do not specify a
control community name, neither read nor write access
is granted.
and write access to the MIB. If you do not specify a
control community name, neither read nor write access
is granted.
trap <name>
Specifies the trap community name that accompanies
trap messages sent to the SNMP manager. If you do
not specify a trap community name, the sending of trap
messages is disabled.
trap messages sent to the SNMP manager. If you do
not specify a trap community name, the sending of trap
messages is disabled.
The default trap community name is
trap
.