Nortel Networks 4050 User Manual
Chapter 12 Configuring SNMP 639
Nortel Secure Network Access Switch 4050 User Guide
2
Modify the SNMP Target information in the applicable fields.
describes the SNMP Target fields.
3
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Removing SNMP targets
To delete an existing SNMP target, perform the following steps:
1
Select the System > Administrative > SNMP > SNMP Targets > SNMP
Target Table tab.
Target Table tab.
The SNMP Target Table appears (see
2
Select the SNMP target to remove from the SNMP Target Table.
3
Click Delete.
Table 134
SNMP Target fields
Field
Description
Index
Specifies a unique integer to identify this SNMP target on
the Nortel SNAS 4050.
the Nortel SNAS 4050.
This field cannot be modified after an SNMP Target is
added.
added.
IP Address
Specifies the IP address of the SNMP manager, to which
trap messages are sent.
trap messages are sent.
Port
Specifies the TCP port number used by the SNMP
manager.
manager.
Version
Specifies the SNMP version used by the SNMP manager.
The options are:
The options are:
•
v1 — use SNMPv1
•
v2c — use SNMPv2c
•
v3 — use SNMPv3
SNMPv3 User
Specifies the USM user name.
A list of all current SNMPv3 users is provided to choose
from. To leave the association empty, select the <No
selection> option.
from. To leave the association empty, select the <No
selection> option.
This field is only available if the SNMP version selected is
SNMPv3.
SNMPv3.