Nortel Networks 4050 User Manual
Chapter 14 Maintaining and managing the system 727
Nortel Secure Network Access Switch 4050 User Guide
The Maintenance menu includes the following options:
/maint
followed by:
dumplogs <protocol>
<server> <filename>
<all-isds?>
<server> <filename>
<all-isds?>
Collects system log file information and sends it to a file
on the specified file exchange server. The information
can then be used for technical support purposes. You
are prompted to provide the following parameters if you
do not specify them in the command:
on the specified file exchange server. The information
can then be used for technical support purposes. You
are prompted to provide the following parameters if you
do not specify them in the command:
•
protocol
is the export protocol. Options are
tftp|ftp|sftp.
The default is
tftp
.
•
server
is the host name or IP address of the file
exchange server.
•
filename
is the name of the destination log file
on the file exchange server. The file is in gzip
compressed tar format.
compressed tar format.
•
all-isds?
specifies whether the information is
to be collected from all Nortel SNAS 4050 devices
in the cluster or only from the device to which you
are connected. Valid options are
in the cluster or only from the device to which you
are connected. Valid options are
y
(= yes, all) or
n
(= no, single).
If you specify
n
(= no) and you are connected to the
MIP, information will be collected for the Nortel
SNAS 4050 device currently in control of the MIP.
SNAS 4050 device currently in control of the MIP.
•
for FTP and SFTP, user name and password.
The file sent to the file exchange server does not
contain any sensitive information related to the system
configuration, such as private keys.
contain any sensitive information related to the system
configuration, such as private keys.