Nortel Networks 4050 User Manual
784 Chapter 17 Configuration example
320818-A
4
Enter a descriptive name to identify the new scope (see
).
In this example, you are creating a DHCP scope for the Red VLAN on the
Ethernet Routing Switch 8300. The scope start address for the VLAN is
10.110.110.5 and the end address is 10.110.110.25. The scope you create
must have a range of IP addresses that is large enough to accommodate all
endpoint devices in your network.
Ethernet Routing Switch 8300. The scope start address for the VLAN is
10.110.110.5 and the end address is 10.110.110.25. The scope you create
must have a range of IP addresses that is large enough to accommodate all
endpoint devices in your network.
Figure 238
Naming the new DHCP scope