Nortel Networks 4050 User Manual
Chapter 17 Configuration example 795
Nortel Secure Network Access Switch 4050 User Guide
Configuring the login domain controller filters
5510-48T(config)# qos nsna classifier name RED dst-ip
10.200.2.12/32 ethertype 0x0800 drop-action disable block
wins-prim-sec eval-order 70
5510-48T(config)# qos nsna classifier name RED dst-ip
10.200.224.184/32 ethertype 0x0800 drop-action disable block
wins-prim-sec eval-order 71
Configuring the NSNA ports
Add the uplink port:
5510-48T(config)#interface fastEthernet 20
5510-48T(config-if)#nsna uplink vlans 210,220,230,240
5510-48T(config-if)#exit
Add the client ports:
5510-48T(config)#interface fastEthernet 3-5
5510-48T(config-if)#nsna dynamic voip-vlans 240
5510-48T(config-if)#exit
Enabling NSNA globally
5510-48T(config)#nsna enable
Configure the Nortel SNAS 4050
To configure the Nortel SNAS 4050, perform the following steps:
1
2
Note: This step is optional.
The PC client must be able to access the login domain controller you
configure (that is, clients using the login domain controller must be able
to ping that controller).
configure (that is, clients using the login domain controller must be able
to ping that controller).