Nortel Networks 4050 User Manual

Appendix A CLI reference 805

Nortel Secure Network Access Switch 4050 User Guide

 

Restores a saved configuration that includes private keys. TIP: Before you paste the 
configuration, you must provide the password phrase you specified when you 
selected include the private keys in the configuration dump. For more information, 
see the 

dump command in 

Terminate the current session and log out. TIP: You are notified if there are unapplied 
(pending) configuration changes when you execute the 

exit command. Pending 

configuration changes are lost if you log out without executing the apply command.

Terminate the current session and log out. TIP: You are notified if there are unapplied 
(pending) configuration changes when you execute the 

quit command,. Pending 

configuration chagnes are lost if you log out without executing the apply command.

Exit from the command line interface if the Nortel Secure Network Access 
Switch 4050 has stopped responding. TIP: This command should be used only when 
you are connected to a specific Nortel Secure Network Access Switch 4050 through 
a console connection. Do not use this command when connected to the 
Management IP of the cluster through a Telnet or SSH connection.

Show the current network status of the Nortel Secure Network Access Switch 4050. 
The 

 command provides information about active TCP connections, the 

state of all TCP/IP servers, and the sockets the servers use.

Find the IP address or host name of a machine. TIP: To use the 

 

command, the Nortel Secure Network Access Switch 4050 must be configured to 
use a DNS server. 

ping <IPaddr 
or host name>

Verify station-to-station connectivity across the network. TIP: You can specify an 
IP address or host name in the command. To specify host names, you must 
configure the DNS parameters. 

traceroute 
<IPaddr or 
host name>

Identify the route used for station-to-station connectivity across the network. TIP: You 
can specify an IP address or host name of the target station in the command. To 
specify host names, you must configure the DNS parameters. 

View all the current settings for the active menu.

Obtain a summary of the current settings for the active menu.

Dump the current configuration for the active menu. TIP: You can cut and paste the 
dumped information into the CLI of another operator at the same menu level. In all 
Statistics menus, the dump command provides statistics information for the active 
menu.

lines <n>

Set the number of lines (n) that display on the screen at one time. TIP: The default 
value is 24 lines. When used without a value, the current setting displays.

Global commands (Sheet 2 of 3)