Nortel Networks 4050 User Manual
Appendix C Supported MIBs 879
Nortel Secure Network Access Switch 4050 User Guide
Supported traps
Table 206
Supported traps
Trap Name
Description
authenticationFailure
Sent when the SNMP agent receives an SNMP message which is not
properly authenticated. This trap is disabled by default. To enable the
trap through SNMP, set
properly authenticated. This trap is disabled by default. To enable the
trap through SNMP, set
snmpEnableAuthenTraps
to enabled or
use the CLI command
/cfg/sys/adm/snmp/snmpv2-mib/
snmpenable
.
Defined in SNMPv2-MIB.
coldStart
Sent when the Nortel SNAS 4050 reboots.
Defined in SNMPv2-MIB.
isdAlarmCleared
Sent when an alarm is cleared.
isdDown
Signifies that a Nortel SNAS 4050 device in the cluster is down and
out of service.
out of service.
isdLicense
Sent when the Nortel SNAS 4050 devices in the cluster have different
licenses and when a demo license has seven days left before
expiration.
licenses and when a demo license has seven days left before
expiration.
Defined in ALTEON-ISD-PLATFORM-MIB.
isdLicenseExpired
Sent when a license has expired.
isdMipMigration
Signals that the master IP has migrated to another Nortel
SNAS 4050.
SNAS 4050.
isdSingleMaster
Signifies that only one master Nortel SNAS 4050 in the cluster is up
and operational. Only having one master in a cluster means that the
fault tolerance level is severely degraded — if the last master fails, the
system cannot be reconfigured.
and operational. Only having one master in a cluster means that the
fault tolerance level is severely degraded — if the last master fails, the
system cannot be reconfigured.
linkDown
Sent when the agent detects that one of the links (interfaces) has
gone down.
gone down.
Defined in IF-MIB.
linkUp
Sent when the agent detects that one of the links (interfaces) has
gone up.
gone up.
Defined in IF-MIB.