Nortel Networks 4050 User Manual
892 Appendix F Configuring DHCP to auto-configure IP Phones
320818-A
For information on the minimum firmware versions required to support IP Phones
in the Nortel SNA solution, see Release Notes for the Nortel Secure Network
Access Solution, Software Release 1.0 (320850-A).
in the Nortel SNA solution, see Release Notes for the Nortel Secure Network
Access Solution, Software Release 1.0 (320850-A).
Configuring IP Phone auto-configuration
To configure Windows 2000 Server DHCP to auto-configure the IP Phones,
perform the following steps:
perform the following steps:
1
Create DHCP options (see
)
•
Call Server Information
•
VLAN Information for auto-discovery of the IP Phone VLAN ID
2
Configure the DHCP options (see
Repeat this step for the data (or boot) VLAN and the Phone VLAN.
3
Set up the IP Phone (see
)
Creating the DHCP options
1
On the Windows 2000 Server Start menu, select Programs > Administrative
Tools > DHCP.
Tools > DHCP.
The DHCP Management Console opens (see
).