Nortel Networks 4050 User Manual
548 Chapter 10 Configuring system settings
320818-A
2
Enter the SRS Control information in the applicable fields.
describes the SRS Control Settings fields.
3
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Configuring Nortel SNAS 4050 host SSH keys using the
SREM
SREM
The Nortel SNAS 4050 functions as both SSH client (for importing and exporting
logs using SFTP) and SSH server for secure management communications
between the Nortel SNAS 4050 devices in a cluster.
logs using SFTP) and SSH server for secure management communications
between the Nortel SNAS 4050 devices in a cluster.
The SSH host keys are a set of keys to be used by all hosts in the cluster in
accordance with the Single System Image (SSI) concept. As a result, connections
to the MIP always appear to an SSH client to be to the same host.
accordance with the Single System Image (SSI) concept. As a result, connections
to the MIP always appear to an SSH client to be to the same host.
During initial setup, there is an option to generate the SSH host keys
automatically.
automatically.
To generate and manage the SSH keys used by Nortel SNAS 4050 hosts in the
cluster, perform the following steps:
cluster, perform the following steps:
1
Select the System > Administrative > SSH Keys tab.
The SSH Keys screen appears.
2
Select from one of the following tasks:
Table 113
Add SSH Key fields
Field
Description
SRS Port
Specifies the TCP port used for communication with the
SRS administration server. The default is port 4443.
SRS administration server. The default is port 4443.
Enabled
When checked, enables SRS administration, for creating
and managing SRS rules
and managing SRS rules
.
Note: SCP is not supported.